Popular Posts

Friday, March 19, 2010

Telecom OSS/BSS: An Overview

1. Introduction

Before the initial 1970s, most of the support activities in a telephone company such as taking orders, maintaining network inventory, provisioning services (for example, line assignment and testing), configuring network components, managing faults and collecting payments were performed manually. It was realized that many of these activities could be replaced by computers. In the next few years, a number of computer systems and software applications were created to automate these activities. Examples include TIRKS, RMAS, SES, etc. Thus came the term Operations Support Systems (OSS).

OSS are “network systems” dealing with the communications network and supporting processes such as maintaining network inventory, provisioning services, configuring network components, managing faults.

Business Support Systems (BSS) is a newer term and typically refers to “business systems” dealing with customers and support processes such as taking orders, processing bills, collecting payments, sales and marketing, supporting customer care agents in response to service requests, trouble reporting and billing inquiries, etc.

OSS and BSS systems together are often abbreviated as BSS/OSS or B/OSS. The term OSS was historically used to include both network and business systems. Some industry analysts, system integrators and service providers still use the term OSS to include both network and business systems, which sometimes causes confusion.

This article provides an overview of some of the core areas in OSS and BSS such as Order Fulfillment, Service Assurance and Billing systems. The following BSS/OSS systems are covered:
  • Order Fulfillment – Order Management, Service Provisioning and Inventory Management
  • Service Assurance - Fault & Trouble Management, Network Performance Management, Topology & Configuration Management, Planning & Testing
  • Billing - Billing Mediation, Rating, Billing Systems, Interconnection Billing, Revenue Assurance
The article explains some of the basic functions of these systems. However, this article doesn't intend to provide extensive details. For an extensive overview of business activities, business process and functions, refer to standards such as eTOM and TAM at http://www.tmforum.org/.

2. The Realm of OSS/BSS in Order Fulfillment, Assurance and Billing

2.1 Order Fulfillment

Communications products/services could range from Voice services to IP and Data services to Hosting and CPE services. Some of the examples of communications products/services are: 
  • Voice – Basic telephony, long distance, toll-free, Voice over IP (VoIP), Contact Center, Local Access, etc.
  • Internet Protocol (IP) – Internet Access, VPN, Contact Center, VoIP, Remote Access, etc.
  • Data – Layer 1 Wide Area Network (WAN) Services such as SONET, Layer 2 WAN services such as ATM, Frame Relay, Private Lines, Layer 2 VPN and Metro Ethernet, etc.
  • Hosting – Custom Application Environments, Disaster Recovery, Managed Services such as storage, security and network services, Web Site Hosting, etc.
Order Fulfillment functions are a critical set of activities performed in order to fulfill customer orders for services in a Communications Service Provider (CSP) environment.
The following figure shows a very high-level view of activities performed in a typical CSP environment.


After order entry, validation and submission, orders are decomposed and sent for provisioning. Upon fulfilling the decomposed orders and appropriate testing of the circuits, the orders are put into inventory. The following sub-sections explain the Order Fulfillment related functions and OSS/BSS systems.

2.1.1 Order Management

Order Management systems are complex systems that allow customer or customer service representatives to capture and process new orders, modify existing orders, process customer moves and changes, price quotes and orders, validate orders, etc., while supporting multiple channels such as Web, Order template documents and partner applications as well as multiple lines of businesses.  

Order Management includes the following areas: 
  • Order Entry and validation – The Order Entry process captures order details such as package or plan, service address, service details, customer accounts, relevant contacts and applicable contracts. Data entered during Order Entry is also validated against predetermined rules.
    Orders can be validated as the data is entered and/or validation after all the data has been entered. Products/solutions that validate order data as they are entered and walk the user through the product configuration process are known as “Product Configurators”. One of such tools available in the market is Selectica COnfigurator.
  • Order Decomposition – A single customer order can be decomposed into one or more service requests, typically based on service types or quantities, in order to be able to fulfill an order.
    For example, if a customer order contains both a VoIP order and a phone line order, two service requests would be created, one each for VoIP and the phone line, each of which would be sent to the appropriate provisioning systems.
One of the major problems service providers often grapple with is that, as new services are added to the offerings, led by different business units, the lack of flexible order management platform results in product/service specific OSS/BSS applications. These in turn result in higher time-to-market as well as increased costs of maintaining many different applications and systems. Product catalog based Order Management solutions attempt to solve these problems by storing and processing qualification rules for services based on customer profiles, ordering channels, service locations, product interdependencies, availability, customer eligibility and other business constraints.

2.1.2 Service Provisioning

Service Provisioning systems are systems used to setup products/services for the customer after an order for the services has been created and accepted by the CSP.

Service provisioning activities include specifying the pieces of equipment and parts of the network to fulfill the service, configuring the customer’s routing path, allocation of bandwidth in the transport network, setting up of wiring and transmission, etc.

Some of the systems that constitute provisioning systems are: Circuit Design & Assignment Tools, Activation systems, and Field Service Management systems.

Circuit design refers to specifying whether facilities exist to provide the service and which pieces of the network equipment and routes the service shall utilize.

One of the most widely used systems providing Circuit Design facility is Telcordia TIRKS. Apart from Circuit Design support, it also provides circuit order control, inventory record maintenance, selection and assignment of components from inventory, and preparation and distribution of circuit work orders. The order control module in TIRKS works with a circuit provisioning system and operates in conjunction with other TIRKS components to assign facility and equipment information for circuit orders and design circuits. TIRKS can then provide automated design criteria for certain circuit orders. The circuit design generated in TIRKS is then communicated to field operations or automated activation systems for implementation.

Circuit Design and Assignment tools these days often have graphical tools that allow a user to create services on a network map using mouse clicks and drag-and-drop rather than drawing maps by hand or using an abstract set of equipment identifiers displayed in a table.

After a service is designed based on the existing equipment and circuit inventory, it is ready to be activated. If new equipment or lines need to be configured manually, a Field Service Management (FSM) system is notified which in turn dispatches technicians.

Moreover, certain activations can be performed automatically. For example, issuing commands to ATM or circuit switches to provision circuits, to SONET terminals to allocate bandwidth, and to a wide array of access devices such as DSLAMS, Digital Loop Carriers (DLC), or cable modems. For such activations, Service Activation systems pass the device specific commands and configuration changes to the network elements, Element Management Systems (EMS), Network Management Systems (NMS) or application hosts.

EMSs are designed to receive and execute commands sent by activation systems on the devices. EMSs can also feed equipment status data back to network and trouble management systems. EMSs use protocols such as Common Management Information protocol (CMIP) or Transaction Language (TL) or Simple Network Management Protocol (SNMP) to communicate with activation and other systems.

Activation systems often comprise a library of adapters to various network systems. They usually also support transaction control, i.e. the capability to roll-back operations already performed, in case an error occurs.
It should be noted that Provisioning systems interact with the Inventory systems, both to verify that the required network elements and other facilities are available, and once the resources are provisioned - to reflect the changed on-line configuration of the facilities. Therefore, provisioning systems have close channels with inventory systems. As a result, some vendors have combined workflow capabilities with inventory management capabilities in their products.
 
2.3 Inventory Management
 
Tracking inventory involves tracking equipment, facilities and circuits.

Some examples of information tracked are: the location and quantities of the equipment, how a piece of equipment is configured and its status, etc.
Inventory Management Systems track both the physical network assets (such as equipment and devices) as well as “logical” inventory (such as active ports, circuit ids, IP addresses, etc.), although not all support both.

By relating usage of network assets to specific customers and services, an inventory system can help network operations determine the network usage and available capacity as well as enable automated network design and planning. Inventory Management Systems also enable Service Assurance systems to find the impact of a network fault on the customer’s circuits.

Some tools also have “auto-discovery” features to automatically check physical network assets and match the results with the information held in the inventory. However, these work only with some of the newer intelligent network elements.

2.2 Service Assurance

Communications service providers (CSP) strive to differentiate themselves from their competitors by implementing attractive Service Level Agreements (SLA). SLAs are formal contracts where the level of service delivered by the CSP to his customer is stipulated. An SLA may specify levels of service availability, performance, operation, etc. as well as penalties upon violation of the SLA.

Offering SLAs implies that the service provider has the ability to monitor, act and report the level of service, in order to assure the quality of services delivered to the customers. Service Assurance refers to all the activities performed for such an assurance. The goal of Service Assurance is to provide an optimal customer experience, that helps retain existing customers, attract new customers and prevent penalties arising out of violation of SLAs.

The following sub-sections introduce some of the common service Assurance systems.

2.2.1 Fault and Trouble Management

Fault Management Systems are designed for detection, isolation and correction of malfunctions in a communications network. They monitor and process network alarms generated by network elements (routers, switches, gateways, etc.). An alarm* is a persistent indication of a fault that is cleared only when the triggering condition is resolved.

Examples of trouble or fault in a network are damage to an optical fiber line, switch failure, etc. Such a problem in the network can result in a chain reaction where many network elements in a certain path produce alarms*.

Fault Management Systems may be either a component within Network Management Systems or as a standalone set of system and application software.

The following figure illustrates how fault management works.



Network Elements are designed to provide various levels of self-diagnosis. Older Network Elements might simply send an alarm notifying a problem while newer Network Elements can provide more precise and detailed messages. Fault Management Systems may collect alarms via SNMP traps, CMIP events or proprietary agents, via EMS. They use complex filtering systems to assign alarms to specific severity levels and correlate different alarms to locate the source and cause of a problem.

After a problem is identified, the FMS then notifies appropriate network operators as well as pass the problem information to a Trouble Management System that in turn logs the problem and issues a trouble ticket to start the repair process.

The Trouble Management System then sends commands to appropriate systems such as Field Service Management to schedule and dispatch technicians to repair the equipment and/or to EMS to reroute network traffic around the problem areas.

Trouble Management systems also handle automatic escalation, such as progression of a ticket from minor to major or major to critical, etc., and support a variety of notification methods such as paging, emails, synthesis voice dial-out.

Fault Management systems usually provide graphical network displays which are projected on large screens at the Network Operations Centres (NOC). NOC operators can see role-based views on their consoles, shortcuts to operations they perform the most as well as tools to quickly make connections to EMS to perform any testing or diagnostic operation.

2.2.2 Network Performance Management

Performance Management components in NMS and other Alarm Handlers monitor applications and systems and collect performance variables of interest at specified intervals. Performance variables of interest may be service provider network edge availability, customer premises availability, response times, packet delivery rate, packet losses, latencies, jitters and out of sequence packet reorder, etc., to name a few.

One way to capture performance metrics is collecting event logs, CDRs and other performance data such as counters or timers that the network and system elements maintain as part of their normal operation. This is referred to as passive measurement. Performance data is captured by polling MIB using SNMP or using syslog, (I & II), FTP, EMS feeds, etc. Most passive measurements report on a single network element.

For example, an Ethernet Switch may have a MIB which provides in and out data volumes of each port, histograms of frame sizes, number and types of erroneous frames, central processing unit (CPU) busy status. Associated Remote Monitoring (RMON) MIB-type data can then list ten most active users, etc. Performance Management tools can access the data by using SNMP to poll the MIBs at predefined intervals.

Statistics on performance variables can also be captured via dedicated network appliances known such as “probes” and “sniffers” that monitor or probe customer’s local loop connections, packet performance, etc. This form of performance testing is usually referred to as active testing.

Packet sniffers typically monitor signaling protocols such as SIP and RTP by inspecting packets on the wire/fiber, using pings, DNS, FTP, HTTP fetches, etc. Examples include WireShark and Geoprobes.

Probes such as Brix Networks BrixWorks Verifiers and Tektronix/Minacom IVR tools typically emulate customer traffic in order to test or probe specific paths to measure the quality of the services supported. Probes could be either placed into the network or could be built into network elements such as in the case of Cisco’s IP Service Level Agreements tools.

Note that active measurement measures a service, such as application response time, instead of the internal operation of a network element.

An example of active network performance test is injecting “ping” (short, network layer echo packet) into the network aimed at a remote IP address. Round-trip time is measured if the ping packet returns, and an error counter is incremented if it doesn’t.

Performance statistics captured by “active” or “passive” performance tests are normalized and routed to relational databases and/or data-warehouses. An alternative is to pass the performance data directly to Performance Management tools. For example, Concord eHealth could collect performance statistics from Netcool agents via SNMP polls at a pre-defined interval.

Performance statistics are initially analyzed to determine the normal (baseline) levels. Appropriate thresholds are determined for each of the interesting performance variable so that exceeding the thresholds indicates a problem.

Performance Management tools then measure the performance variables against SLAs defined as thresholds per application or service, on an on-going basis. In case of exceptions they report them to alarm handlers. This form of performance monitoring is reactive performance monitoring. Some tools also support proactive monitoring by way of providing simulation tools that helps network operators project how growth in network traffic will affect performance metrics and plan to take proactive countermeasures such as increase capacity.

Performance Management tools may also support real-time and historical reporting. Some CSPs have taken performance statistics of the network affecting customers’ circuits to their customer self-service portals.

2.2.3. Topology & Configuration Management

Older networks and systems were static and the network wiring was fixed in place, and sometimes required long outages while changes to the network and its configuration were being made. Any error or inconsistency in the configuration files of different network devices caused problem, and therefore these changes were well controlled [3].

According to [3], with the rise of IP-based, dynamically routed networks, network topologies started becoming dynamic. The topology of the network became dynamic because a few of routers might decide, on their own, to shift routing patterns, or because a network operator group might add a new router or switch to the network, possibly without everyone else in the network operations center being aware of the changes. Instead of static associations between users and network addresses (as was set in the old “hosts” file), DHCP and other techniques allowed users to appear, move, and disappear without providing prior notice to the network administration.

Most major NMSs therefore provide capabilities to automatically discover a network’s actual topology, which is critical to understand network performance or root cause of network alarms, etc.

Probes are placed into the network to automatically find devices and circuits. Also, most network elements provide MIBs that can be polled via SNMP to discover the network, although discovering the network topology in its entirety may not be guaranteed. Backup paths, virtual private networks, MPLS, etc., can make it very difficult to discover actual paths, through multiplexed links, patch panels, and test equipment [3].

Also, most Topology Management Systems allow the network operator to provide hints so that the system, for instance, in order that the system can ignore certain portions of the network. This makes it easier to discover relevant portions of the network more accurately.

Some service providers may run network discovery routines on a daily basis to discover any unauthorized changes to the network topology as a result of security intrusions or unplanned insertion of devices.

Moreover, network elements and computer systems have a variety of version information associated with them. For example, a workstation may have: Operation System, version 32, Ethernet Interface, version 5.4, TCP/IP Software, version 2.0 and SNMP Software, version 3.1. Since multiple engineers/network operators work on making changes to the network equipment, tracking the changes manually would be very tedious and error-prone. Configuration Management tools help automates the tracking of the changes. Configuration Management systems store the configurations in a database or LDAP server for easy access.

They also enable network operators to change configurations of the network elements as well as to roll back a change to a previous configuration, if required.

When a problem in the network occurs, network operators often search the Configuration Management database for clues that can help solve the problem.

2.2.4. Planning & Testing

Network Planning solutions help determine when a communication network needs an upgrade or additional equipment as well as to predict the impact of changes to a service provider’s network’s topology, configuration, traffic and technology. They provide simulation tools that help the network operators to project how growth in network traffic will affect the network performance. Based on the results and other planning activities, network operators can take countermeasures such as increase capacity.

Testing is an important activity in setting up a network or customer circuits. For simplicity in understanding the gamut of testing activities, let us divide them into the following:

1. Testing of existing network or a change
2. Integration testing of services configured for the customer
3. End-to-end testing of services configured for the customer

Testing the entire network platform - including the equipment, services and call quality – is critical for assessing the system prior to deployment and for service assurance in production environments [4].

Network testing tools usually simulate a production environment and generate synthetic voice, video and data traffic, which helps measure call/data quality, network performance, and the affects of any changes to the network or increasing traffic or adding new applications. These tests typically include tests like DNS, HTTP, RTP, Ping, etc. Also, during ongoing operations, these testing tools enable active testing of facilities.

Another form of testing is integration testing of network setup for the customer, i.e., routes, circuits, etc. configured for a customer. Network operators or field engineers perform integration testing of services upon completion of activations and other provisioning activities. Field engineers typically use equipment and network element specific applications to perform integration testing.

Upon completion of integration testing, field operations teams are notified to perform end-to-end testing. End-to-end testing includes testing of circuits, both within the CSP’s network as well as local access circuits between the CSP and the customer premises. Some service provider’s use craft access systems for the benefit of field technician’s access to their internal systems through a hand held terminal [5]. The hand held terminal helps them to access loop testing system and to view the complete test summary from remote locations.

2.3 Billing

IDC [6] defines Billing as: the processing and compiling of charges and enabling of revenue collection for network usage, feature transactions, and access charges of the services.Mediation systems collect network usage data from the network elements and convert to billable statistics.
The following figure depicts a simple Billing flow:




Traditionally, for phone calls, Call Detail Records (CDR) have been used to record the details of the circuit-switched phone call. CDR includes information on start time of call, end time of call, duration of call, originating and termination numbers. CDRs are stored until a billing cycle runs. For IP Based Services, a new standard is gaining acceptance called Internet Protocol Detail Record (IPDR). IPDR supports both voice and data.

Billing systems use mediation output to determine charges for the customers. It is also used to feed other downstream applications such as Fraud and Churn Management.

2.3.2 Rating

Rating systems calculate the charge for an individual call, IP usage event, etc. using the CDRs/IPDRs. Rating systems apply charges based on pre-configured pricing rules, applicable discounts and rebates from promotions.

This rating process has grown increasingly complex in recent years. In older times, it was solely a matter of taking the length of the call, assigning a price based on the mileage band (calculated by cross-referencing the prefix of the originating and terminating numbers in a table of values), and assigning discounts based on the time of day (peak, evening, night), day of the week, and holidays.

Modern rating systems can assign discounts based on calling circles, provide flexible rating plans based on size of accounts and increase switching costs [2]. These serve as strategic marketing tools but can be very complex to administer and operate.

2.3.3 Billing Systems

Billing systems aggregate rated calls, IP/data usage events, etc. and calculate customer invoices. In the United States, billing is usually performed once a month.

Billing systems combine rated records with prior balance information, payment records, recurring charges (such as line rentals), one-time fees (such as installation and service charges), promotions and discounts associated with the customer account, taxes and credits. Overnight billing batch jobs are among the largest batch environment at a CSP’s operating environment. Each customer is assigned a specific billing cycle.

According to Insight [2], the holy grails of the billing industry are unified billing and convergent billing. With unified billing, a customer gets a single bill for all services provided (or billed) by the service provider, appropriately rated, discounted, and taxed, and a single contact for inquiries and negotiation.

2.3.4. Interconnection Billing

In the competitive world of communications, service providers often tie-up with partners, in order to bundle their own products with their partners. This helps the service providers to provide attractive bundles of products and services. However, in order to successfully settle interconnect billing settlements an effective Interconnection Billing is required.

Interconnection Billing products support inter-working of a service provider’s billing systems with the corresponding systems of another service provider, based on interconnect agreements and contracts.

2.3.5. Revenue Assurance

Revenue Assurance & Fraud Management systems verify billing, detect and identify unauthorized usage of service provider network assets. Some of the kinds of frauds are Usage and Subscription.

Usage Fraud means that a customer uses the telecommunications network illegally. This is accomplished either by obtaining a service with no intent to pay or by obtaining unauthorized access to the network (i.e. “hacking” or “cracking”).

Fraud Management systems typically detect and prevent unauthorized access to a communications network by analyzing traffic patterns on the network. Some examples are provided in [8]:

  • One technique involves analyzing the average call duration or the number of calls placed to foreign countries to determine whether the traffic patterns are consistent with a subscriber's call history or pattern. If a call is inconsistent with the subscriber's call pattern profile, the subscriber is provided with a report of the abnormal call activity.
  • Other methods for dealing with the problem of unauthorized use involve automatically denying or blocking access to the network when abnormal use is detected to minimize the subscriber's financial loss.
Subscription fraud means that a customer obtains a service account by giving a false identity (name and/or SSN) or by giving a false address or false credit worthiness.

Detecting subscription fraud involves searching recent order and existing customer data for multiple orders and/or accounts with the same customer name, SSN, or service address.

Common subscription fraud patterns include:
  • Change of billing address within a few weeks of opening an account.
  • Substantial deviation of usage profile of a new user from an average new user.
Common techniques to control subscription based fraud include threshold based analysis, inference rules analysis, profile based analysis such as habitual user profiles and neural networks.

Fraud Management Systems typically read and store usage data from the service provider’s network switching equipment and allows queries to be executed against the data that detect suspicious usage patterns.

They also allow operators to review customer accounts that have suspicious activity, to track their investigation and record the final case resolution.

It should be noted that fraud is different from revenue leakage. Revenue leakage is characterized by the loss of revenues resulting from operational or technical loopholes where the resulting losses are sometimes recoverable and generally detected through audits or similar procedures [1]. Fraud, on the other hand, is characterized with theft by deception, typically characterized by evidence of intent where the resulting losses are often not recoverable and may be detected by analysis of calling patterns.

Another important class of Revenue Assurance tools includes Churn Management tools. Churn management is an important area for service providers that have subscription-based business - due to price wars, aggressive marketing and promotions from competing service providers, and customer’s expectations related to customer service.

Churn Management tools provide functions such as automated behavior analysis, forecasting and simulation, empirical profiling, churn metrics capture, that enable service providers to learn which customers are likely to leave and take appropriate countermeasures.

3. Conclusion

3.1 Summary

OSS/BSS systems and applications automate many of the day to day operations performed in a communications service provider’s operating environment. They optimize the time taken to perform these operations and make the business processes more efficient.

There are no all-encompassing OSS/BSS systems that can be installed, integrated, tested and allow the service providers to easily modernize their end-to-end operations functions.

Service providers, therefore, use all the different approaches: best-of-breed in some areas, off-the-shelf in some, and home-grown custom applications in the remaining areas, to modernize and optimize their operations.

More often than not, many of these OSS/BSS systems are integrated with the others in a point-to-point fashion, as part of discrete projects and programs, sponsored out of different business units. This leads to point-to-point integration of OSS/BSS systems unless the programs/projects are planned with a strategic goal.

A side effect of the difficulty in integrating the various OSS/BSS systems is many of the OSS/BSS systems in a service provider’s operating environment may not be integrated at all. For example, it is not unusual to find the following scenario: when a customer orders a new telephone line, the ordering system takes the details of a customer’s order, but a manual process is present to configure the telephone exchange using a switch management system. Details of the order entered in the Order Handling system is re-keyed manually by the technician into the Switch Management System – a process often referred to as “Swivel-Chair Integration”.

The article provided an overview of some of the core OSS/BSS areas in Order Fulfillment, Service Assurance and Billing.

3.2 References

[1] Who Makes What: OSS, http://www.lightreading.com/document.asp?doc_id=113052&print=true, Light Reading, Dec 2006
[2] The 2007 Telecommunications Industry Review, The Insight Research Corp., Dec 2006
[3] Eric Siegel, Architectural Overview of Network Management, The Burton Group, Oct 2005
[4] Arindam Banerjee, Network Management is the Key to the Success of Next-Generation Architecture, Yankee Group, Jan 2007
[5] Senthil K. Ramachandran, Order Fulfillment Core Processes and Pain Areas, TMFC 2122 White-paper
[6] Sterling Perrin et al., IDC's Service Provider Infrastructure Taxonomy, 2004, IDC
[7] Lars Andersson, OSS Solutions for Network Operators – white paper, 2002
[8] Telecommunications Fraud Detection Scheme, US Patent 5504810, http://www.patentstorm.us/patents/5504810/description.html, April 1996
[9] OSS Through Java Initiative, OSS/J Roadmap, TeleManagement Forum, Jan 2007
[10] Element Management Systems – Definition and Overview, Web ProForums, International Engineering Consortium (IEC)
[11] Divakara K. Udapa, TMN Telecommunications Management Network, McGraw Hill, ISBN:9780070658158, 1999
[12] Enhanced Telecom Operations map - eTOM: The Business Process Language of NGOSS, TeleManagement Forum
[13] Wikipedia, http://en.wikipedia.org/wiki/Operational_Support_Systems
[14] Elisabeth Rainge, Next-Generation OSS and Billing Market Taxonomy, IDC, Oct 2004
[15] Wikipedia, http://en.wikipedia.org/wiki/Fault_management
[16] Wikipedia, http://en.wikipedia.org/wiki/Management_information_base
[17] Network Management Basics, http://www.cisco.com/en/US/docs/internetworking/technology/handbook/NM-Basics.html
[18] Wikipedia, http://en.wikipedia.org/wiki/Network_planning_and_design
[19] Balan Nair et al., Method and system for planning a telecommunications network, United States Patent 5974127, http://www.freepatentsonline.com/5974127.html, Oct 1999
[20] Telecommunications Fraud Detection Scheme, US Patent 5504810, http://www.patentstorm.us/patents/5504810/description.html, April 1996
[21] Stephen Brown, Telecommunication Fraud Management, Jan 2005, http://www.waveroad.ca/ressources/Whitepaper_SB_Janvier2005.pdf
[22] Eric Siegel, Measuring Performance of Networks and Applications, The Burton Group, Feb 2007
[23] International Engineering Consortium (IEC), Tutorials, http://www.iec.org/online/tutorials/

69 comments:

Gateway2Africa said...

Nice information. I am RA consultant, i would like to know more on oss/bss. I need more info from RA perspective.

Ravi Sharda said...

Thanks.

TM Forum has an initiave on Revenue Assurance. Under the downloads section (under the initiative) you can find some great documents on RA.

Thesedeks said...

Simply very useful article.

Thanks Ravi :)

Janit said...

Hi Ravi,
Very nice, well detailed article. You have a nice blog here and would love to see you post more often...:-)

Ravi Sharda said...

Thanks all!

Unknown said...

Hi Ravi,

Awesome!

Varun Deshpande.

Roshan said...

Very nice article. Just what i was looking for an overview about OSS and BSS.
Information on the some of the current market products COTS for the different areas of OSS and BSS would have been useful.

Unknown said...

Good Work Ravi...thanks Mate!!! - Steve..

Revanth said...

Good Blog. Had an overview in <10 minutes.

Unknown said...

Good overview and nicely structured.Thanks.Manoj U P

Sheryl said...

Hi Ravi,

Very useful articles. We have some relevant articles and speaker interviews on OSS/BSS too. Please feel free to take a look, and use our materials, just as long as you give our event Telecom IT Transformation the credits.

www.telecomittransformation.com

rahul.v said...

Ravi, thanks for sharing very useful article.........

Blackie... said...

really great for beginners... thanks man... great work..

Unknown said...

very nice article

Unknown said...

hello ravi Sir,

you have written such a nice information for OSS/BSS i just started my carrier in telecom domain and initially i was not knowing all the technical terms and after going through your blog i am able to understand all the things slowly slowly so again thanks for sharing valuable information.

and i want to know your valuable thoughts on MetaSolv and CRAMER systems.

Unknown said...

hello ravi Sir,

you have written such a nice information for OSS/BSS i just started my carrier in telecom domain and initially i was not knowing all the technical terms and after going through your blog i am able to understand all the things slowly slowly so again thanks for sharing valuable information.

and i want to know your valuable thoughts on MetaSolv and CRAMER systems.

santosh baranwal said...

very nice article.
Thanks

Unknown said...
This comment has been removed by the author.
vijay said...

Thank you very Much for valuable information. Had a doubts, all cleared through your article. Thank You very much sir.

Unknown said...

Hi,
very nice overview!

You know if there's any online course regarding it?

tks

gvzardetto@gmail.com

Unknown said...

Ravi Shardas weblog very nice post
telecom staffing

Unknown said...

Hi Ravi,

I am working in an ISP and Telecommunication organization and leading B/OSS department. I am searching that kind of documents which can give a more details of OSS and BSS current practice worldwide along with my expectation like FCAPS. Can you give me such a documents that you have made for full B/OSS architecture.

Thanks

Selim Mohammad
(goodboylotaplayer@gmail.com)

Unknown said...

This is truly a very informative post.
Best Network Management Solution | Best Application Management Solution

Unknown said...

The blog is absolutely fantastic. Lots of great information and inspiration, both of which we all need. Thanks.

Cloud Infrastructure & Hosting Services | Public cloud service in india

Nikul Chauhan said...

Hello Ravi
You explained in very nice way but still I would like to know more about BSS and OSS and its internal components and its working in very details. Do you have any link or any suggestion for it.

Unknown said...

Thankyou for the Collection of Tutorials on Business Analyst

Business Analyst Online Training

Medical Billing said...

HII..

Great blog nice n useful information , it is very helpful for me..

Outsourcing Services in USA

Abc said...

simply explained the complex thing...very nice

Unknown said...

Your blog post is good one. I really liked it. I also work on this type of site that is based on telecom and please keep updating us with your views.

Business Grade VoIP | IT Consultant

arvindswamy said...

Hey,Thank you for sharing such an amazing and informative post. Really enjoyed reading it. :)


Order Management Software

Unknown said...

Great blog nice n useful information , it is very helpful for me!!

IT security certification in Chennai

Rachael Laurence said...

Hey I just paid for this same article that is here for free, what a total rip

Unknown said...

Telecom OSS/BSS: An Overview Post
inventory management software

Unknown said...

KaizenImperial - Manufacturer,Exporter & Supplier Of Water Level Recorder, Water Current Meter,Automatic Weather Station,Laboratory Testing Equipment, Water Testing Equipment, Petroleum Testing Equipment, Etc. Located In New Delhi,India www.kaizenimperial.co.in

Unknown said...

I read your blog on daily basis. This is really great and informative post. Thanks for sharing. Cloud Telephony Services

takestockinventory said...

You break it down nicely. Very informative post. Keep up the good work.
Nice and quite informative post. I really look forward to your other posts.

home insurance inventory
home inventory companies
home inventory for insurance
home inventory list for insurance
home inventory service

Anonymous said...

I really appreciate information shared above. It’s of great help. If someone want to learn Online (Virtual) instructor lead live training in IBM Netcool Operations Insight 1.3, kindly contact us http://www.maxmunus.com/contact
MaxMunus Offer World Class Virtual Instructor led training on IBM Netcool Operations Insight 1.3. We have industry expert trainer. We provide Training Material and Software Support. MaxMunus has successfully conducted 100000+ trainings in India, USA, UK, Australlia, Switzerland, Qatar, Saudi Arabia, Bangladesh, Bahrain and UAE etc.
For Demo Contact us.
Nitesh Kumar
MaxMunus
E-mail: nitesh@maxmunus.com
Skype id: nitesh_maxmunus
Ph:(+91) 8553912023
http://www.maxmunus.com/




anubhavgupta said...

KEEP SHARING!!!!
Now it easy to save, add or import contacts using telephony services whic provides by the cloud telephony company in India . Its inbuilt features enable you to make a new call or send a new text and automatically update it in your CRM.

Unknown said...
This comment has been removed by the author.
Unknown said...

very detailed and elaborate post

manojrawat said...

Thanks for Sharing
LeadNXT is the most experienced Cloud Telephony Company in India, who offers complete business communication services to keep your customers satisfied and happy.

manojrawat said...

Thanks for Sharing
LeadNXT is the most experienced Cloud Telephony Services , who offers complete business communication services to keep your customers satisfied and happy.

Anonymous said...

Your blog has always been a good source for me to get quality tips on blogging. Thanks once again GST software price

Visit our official website: http://www.myentry.co.in

Unknown said...

Nice thanks for sharing this blog post.


Online ERP Software

Unknown said...

Hi,

Thanks for sharing a very interesting article about Telecom OSS/BSS: An Overview. This is very useful information for online blog review readers. Keep it up such a nice posting like this.

From,
Retailmass,
POS Billing Software

hsraletta said...

Nice information thanks for sharing this article keep publishing your content new content good reader.i hope it will help a lot for all. online invoice software.

nidhi said...

I really liked your article , your article is very
petrified me in the learning process and provide
additional knowledge to me , maybe I can learn
more from you. Thank you for sharing valuable study material

Anonymous said...

Thanks for sharing this useful information! Hope that you will continue with the kind of stuff you are doing.
https://www.vrssoftwares.com/web-development/

anupriya said...

Are you think about how to choose a Retail Billing Software in Chennai? Billing software has helped many businesses with faster billing, Reduction of workload and it helps you send out invoices faster so that you can be paid sooner, there are numerous billing software companies, where they can provide the best service at an affordable price.

Buy Hand Sanitizer In Bulk said...

This is really a very good article. Thanks for taking the time to discuss with us, I feel happy about learning this topic. keep sharing your information regularly for my future reference.
GST Software Company In Maharashtra

saran said...

Thanks for sharing valuable information. The Authour expressed his view in a perfect manner

Billing Software in Chennai

Retail Billing Software in Chennai

POS Software in Chennai

Restaurant Billing software in Chennai

sierragold said...

I enjoyed this blog post. It is inspiring and informative.
Call Accounting Software

super fast processing said...

At Superfastprocessing, we run a multi-server configuration with high-fault tolerance and load balancers. Our platform is horizontally scalable and always stays highly available for real-time data processing needs.

Zohno Inc. said...

This is amazing and really inspiring!! Need help with Z-Hire or Z-Term? Check out our resources and learn everything you need to get started with the Cloud Identity Management System !

Adam said...

Nice post,  very useful blogs with very useful information, thank you for sharing this post  noc monitoring services 

Yogesh.M said...

Very good article. Thanks for sharing.

For best Retail Billing Software please click below link.
Retail Billing Software in Bangalore

Spam Leads said...

Hi All!

We are selling fresh & genuine SSN Leads, with good connectivity. All data is tested & verified.
Headers in Leads:

First Name | Last Name | SSN | Dob | Address | State | City | Zip | Phone Number | Account Number | Bank Name | DL Number | Routing Number | IP Address | Reference | Email | Rental/Owner |

*You can ask for sample before any deal
*Each lead will be cost $1
*Premium Lead will be cost $5
*If anyone wants in bulk I will negotiate
*Sampling is just for serious buyers

Hope for the long term deal
For detailed information please contact me on:

Whatsapp > +923172721122
email > leads.sellers1212@gmail.com
telegram > @leadsupplier
ICQ > 752822040

sathya said...


I like visiting your site since I always come across interesting articles like this one.
Selenium Training in Chennai | Certification | Online Courses

selenium training in chennai

selenium training in chennai

selenium online training in chennai

selenium training in bangalore

selenium training in hyderabad

selenium training in coimbatore

selenium online training

Ab said...

Its a great layout of the content you mentioned above, Worth to read it above all the points! Always Business monitor the stock, maintain the inventory through,
Inventory & stock Management Software purchase and sales record with
billing & invoices software and sales records and giving pending payment alerts.
look forward for more like this..

goldensun said...

For more information visit here : Telecommunication platform servicesWould you like to take advantage of the industry’s best partner model? We offer the most scalable telecommunication platform in the world. Sell your own service under your own brand name and satisfy your customers with our system’s 99.99% uptime reliability.

Keerthi55 said...

I loved your post.Much thanks again. Fantastic.
SAP PP module free online training
SAP PP module online training

Ringstar said...

I just need to say this is a well-informed article which you have shared here about Sip Providers In UAE It is an engaging and gainful article for us. Continue imparting this sort of info, Thanks to you.

Dnieper Fire & Safety said...

Thank you very much for sharing your thoughts with us.
Fire System Repair Services in Uae
emergency lighting system supplies in UAE

Connectel In said...

Contact Connectel regarding having an analysis of your Call Detail Record Analysis conducted. We perform Call Detail Record Investigation Laboratory in-house.

Abni Rajput said...

Hey, nice blog, I found many things that are very informative, I also found related to telecom fraud. You can visit for information.

Connectel In said...

Call Detail Record Analysis
Call Detail Record Analysis
Call Detail Record Analysis
Call Detail Record Analysis
Call Detail Record Analysis

yash said...

I am impressed by the information that you have on this blog. It shows how well you understand this subject.

Tele SMS

Alia parker said...

There are a few things to keep in mind when using a roaming eSIM card. First, it is important to make sure that your phone is compatible. Second, you will need to purchase a roaming eSIM card from the carrier in the new country. Finally, you will need to activate it before you can use it. Roaming eSIM Card

Alisha Charlton said...

Great article! It's fascinating to see how telecom billing has evolved over the years. I appreciate the detailed insights into billing systems and software, as well as the importance of staying vigilant against fraud and security threats. Top Telecom Billing Systems, Telecom Billing Platform